Tampilkan postingan dengan label Canon Resetter. Tampilkan semua postingan
Tampilkan postingan dengan label Canon Resetter. Tampilkan semua postingan

Resetter Canon PIXMA iP1880 & iP1980

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More



When you try to print and a pop-up message appear saying that "The ink absorber is full" it means that the ink absorber or wastepad inside your printer is almost full. In order to solve this you need a technical knowledge on how to disassemble the printer and software resetter.

FIRST STEPS: Entering Service Mode
First you have to enter in service mode state in order to used the resetter. To do that follow this procedure,
1. Unplug the power cable of the printer.
2. Press and hold down the power button with your index finger and then plug-in the power cable.
3. While holding down the power button, press the reset/resume button twice and release the power button
4. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Software
1. After you download the resetter, extract it and double click "GeneralTool"
2. Select or Check the EEPROM CLEAR then click the MAIN button, you will notice that the power button light will blink. It means that the it clear the waste ink counter.

3. Unplug the power cable to turn off the printer
4. Then plug-in again the power cable. then turn ON the printer. And its DONE!




Resetter Canon PIXMA iP1880 & iP1980
Read more »

Resetter Canon PIXMA MX318

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

How to reset Canon MX318 printer

If you encounter a problem or an error like "Ink absorber is full" or Error Code 27 or "Error Code 5B00". Its mean that the Printer Counter Protection is Full and it required a reset and Ink wastepad replacement, if you want your printer to work again. There are two ways to reset the Canon MP (all in one) printer, One is by using a Software tool and the other is manually resetting the EEPROM of the printer. Below is the step by step procedure on how to reset your Canon MP (All in One) printer.

Please follow the step by step procedure to reset your Canon Pixma MX318 Printer
  1. Turn off the Printers.
  2. Press and Hold the "Stop/Reset" button then press POWER button.
  3. Release the "Stop/Reset" button while keeping POWER button on press.
  4. Press "Stop/Reset" 2 times and then release all the buttons.  
  5. Note: If the above was properly performed the printer will enter the "Service Mode".
  6. Press the "Stop/Reset" button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.
    Mode:
    1. Service/Factory test printout, including ink sensor check.
    2. EEPROM - Info printout.
    3. EEPROM - Initialization.
    4. Reset the Waste ink counter.
  7. After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer. Or unplug the printer to turn off.
  8. On the Canon Pixma MX318 Printers, And your done!
Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean the ink wastepad.
Read more »

Resetter Canon PIXMA MP150, MP160, MP170, MP180, MP450 & MP460

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA MP150, MP160, MP170, MP180, MP450 & MP460

Method One: Using Mptool Software to reset Canon MP Printer
1. Turn of printer then run mptool software this software automatically detect the printer.
2. Click reset main and reset platen button in the waste ink counter section.
3. If you want to reset the cartridge ink level, click reset black and reset color in the ink counter section.

Method Two: Reset manual Canon Pixma MP Printers
1. Turn off the Printers.
2. Press and Hold the button Resume/Cancel then press POWER button.
3. Release the Resume/Cancel button while keeping POWER button on press.
4. Press Resume/Cancel 2 times and then release all the buttons.
5. When the indicator recorded GREEN - click Resume/Cancel 4 times!
6. Turn off and On the Canon Pixma MP Printers. And your done.




Resetter / Service Tools Canon PIXMA MP150, MP160, MP170, MP180, MP450 & MP460
Read more »

Resetter Canon PIXMA MX338

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA MX338

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "MX338.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again. and its done!




Resetter / Service Tools Canon PIXMA MX338

Read more »

Resetter Canon PIXMA MP276

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA MP276

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "MP276.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again. and its done!




Resetter / Service Tools Canon PIXMA MP276
Read more »

Resetter Canon PIXMA iP4680

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA iP4680

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down RESUME button and press Power button.
3. Keep holding down Power button and let RESUME button go.
4. Then Press RESUME button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "iP4680.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!




Resetter / Service Tools Canon PIXMA iP4680
Read more »

Resetter Canon PIXMA iP3680

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA iP3680

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down RESUME button and press Power button.
3. Keep holding down Power button and let RESUME button go.
4. Then Press RESUME button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "iP3680.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!




Resetter / Service Tools Canon PIXMA iP3680
Read more »

Resetter Canon PIXMA MP480

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

Resetter / Service Tools Canon PIXMA MP480

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA MP480
Read more »

Resetter Canon PIXMA MP198

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

Resetter / Service Tools Canon PIXMA MP198

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA MP198
Read more »

Resetter Canon PIXMA MP245

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

 
Resetter / Service Tools Canon PIXMA MP245

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA MP245
Read more »

Resetter Canon PIXMA MP258

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA MP258

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA MP258
Read more »

Resetter Canon PIXMA iP2770

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More


Resetter / Service Tools Canon PIXMA iP2770

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA iP2770
Read more »

Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

 
Powered by Ishlah Computer™