Resetter Canon PIXMA MP198

Posted by Aldi Arman
Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

Resetter / Service Tools Canon PIXMA MP198

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
3. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
4. and its done!




Resetter / Service Tools Canon PIXMA MP198

0 komentar:

Poskan Komentar

Twitter Delicious Facebook Digg Stumbleupon Friendster Favorites More

 
Powered by Ishlah Computer™